Friday, October 8, 2010

Toulmin Model

Last year, I was working on a research paper about Reuleaux triangles. They are triangles of constant width and thus, despite having corners, they can roll smoothly. The interesting problem I came upon, however, was how to make a bicycle with Reuleaux triangle wheels to roll smoothly. The shapes work perfectly as rollers but using them as wheels is more complicated as the center of the triangle does not stay the same. As a corner reaches the ground the center rises while when a side/curve is on the ground, the center is lower. It is found that the center actually follows an elliptical curve as the triangle rolls.

After working on this for some time, I came up with the claim that a bicycle with reuleaux triangle wheels can roll smoothly if the wheels are constructed using a two spring system, allowing the frame of the bike to be attached to a fixed point rather than the changing center of the triangle.

The qualifiers or conditions for this claim are that the claim stands for when the bike is already set in motion. Also the springs must be kept tense at all times and the outside ends of the springs must be attached to a material that can slide against the inside of the wheel with minimal friction.

The grounds for this claim are that the triangles have constant width and therefore roll smoothly. Also, springs can be used because they can be held tense at different lengths.

The warrant is that since the triangles can roll smoothly on their own, it is possible for them to roll smoothly in a system. The center of the triangles follow an elliptical curve when rolling, so the springs will be able to account for the changing length between the axle and the elliptical curve carved into the wheel.

The backing is that someone has already constructed a bicycle with reuleaux polygon wheels that rolls smoothly. Guan Baihua has made a model in 2008 and although his was designed differently it also relied on the idea that the bike frame is not attached directly to the center of the wheel. Also, springs are used to adjust for changing lengths in many apparatuses.